BMDBG - 1826 SCHOOL BUS YELLOW MACH EN
- MSDS: BMDBG
- Manufacturer: EVR GARD COATINGS CO
- Product Name: 1826 SCHOOL BUS YELLOW MACH EN
- National Stock Number: 8010-00N026711
Product Identification
Product ID:1826 SCHOOL BUS YELLOW MACH EN
MSDS Date:09/15/1987
FSC:8010
NIIN:00N026711
MSDS Number: BMDBG
Responsible Party
PARAMOUNT, CA 90723
US
Emergency Phone: 213-531-0131
Info Phone: 213-531-0131
Preparer: BORNEO
Cage: 5G582
Contractor
Telephone: 310-531-0131
Cage: 5G582
Ingredients
5 @ 68F.
Fraction By Weight: 0.15%
OSHA PEL 125 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: EXCESS INHAL OF VAPORS MAY
RESULT IN DIZZ & HEADACHES. UNCON IN EXTREME CASES. SKIN/EYE:
IRRITANT. AFFECTED AREA WILL SHOW SIGNS OF REDNESS/RASH IF NOT
WASHED W/SOAPY WATER IMMED. PRLNG/RPTD CO NTACT MAY CAUSE
DERMATITIS. INGEST: IRRIT OF RESP TRACT CHARACT BY HDCH, DIZZ,
STAGGERING, CONFUSION (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: & UNCONSCIOUSNESS & COMA IN EXTREME
CASES. INHAL: IRRIT OF NOSE, THROAT & EYES, DIZZ, WEAKNESS,
FATIGUE, NAUS, HDCH. SYMPS DISAPPEAR WHEN EXPOSURE CEASES. RPTS
HAVE SHOWN RPTD/PRLNG OCCUP OV EREXP TO SOLVS W/PERM BRAIN DMG &
NERVOUS SYSTEM DMG.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE PATIENT TO FRESH AIR. EYES: FLUSH WITH PLENTY
OF WATER FOR AT LEAST 15 MINS. SKIN: REMOVE SOAKED CLOTHING AND
WASH SKIN W/SOAPY WATER THOROUGHLY. APPLY LOTION OR OIL TO
EFFECTED AREA AF TER THOROUGH WASHING. INGEST: DO NOT INDUCE
VOMITING. CALL MD IMMED.
Fire Fighting
Lower Limits:1.0%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.FIGHT AS VOLAT FIRE. CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO EXTREME
HEAT-KEEP AWAY FROM AREAS EXPOS TO FIRE.
Unusual Fire/Explosion Hazard:AVOID APPLIC IN AREAS OF PILOT
LIGHTS/SPARKS/OTHER IGNIT SOURCES AS VAPS MAY ACCUM ON FLOOR &
IGNITE.KEEP CNTNRS CLSD TIGHTLY/STORE IN COOL PLACE (SUPP DATA)
Accidental Release
Spill Release Procedures:ABSORB SPILLED MATERIAL WITH ABSORBENTS, SUCH
AS SAWDUST, CLAYS, ETC. FLUSH SPILL AREA WITH LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE NEAR OPEN FLAME/SOURCES
OF IGNIT. DO NOT STORE IN HIGH TEMP STORAGE. IN CASE OF FIRE,
REMOVE CLSD CNTNRS FROM AREAS EXPOS TO FIRE.
Other Precautions:EMPTY CNTNRS USUALLY STILL HOLD RESIDUES OF MATERIAL
& VAPS. THESE MSUT BE CONSIDERED HAZARDOUS AND DISPOSED OF IN
ACCORDANCE WITH PROPER HANDLING PROCEDURES PRESCRIBED FOR HAZ
CHEMICALS. VOC'S <400.
Exposure Controls
Respiratory Protection:USE OF NIOSH/MSHA APPRVD RESPS IS RECOMM WHEN
USING SOLV BASED COATINGS. WHEN LEVEL OF SOLV VAPS IS NOT
KNOWN/EXCEEDS LEVEL AT WHICH REG RESPS ARE EFTIVE, USE OF
NIOSH/MSHA APPROVED RESPS SUCH AS TC-1 9C-NIOSH-MSHA IS HIGHLY
RECOMMENDED.
Ventilation:BE SURE TO PROVIDE ADEQ VENT IN ALL WORKING AREAS AT ALL
TIMES. SERIOUS HLTH PROBLEMS COULD RSLT FROM RPTD/PRLNG EXPOS.
Protective Gloves:NEOPRENE, BUNA N GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AVOID PRLNGD CONTACT/OVEREXP. PROVIDE
ADEQUATE VENTILATION AT ALL TIMES WHEN APPLYING THIS PRODUCT.
Work Hygienic Practices:STANDARD HYGIENIC PRACTICES MUST BE OBSERVED
WHEN HANDLING ALL CHEMICALS.
Supplemental Safety and Health
EXPLO HAZ: WHEN NOT IN USE.
Chemical Properties
HCC:N1
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.2
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT SOLUBLE
Appearance and Odor:YELLOW PAINT - PAINT THINNER ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALIS, LONG TERM CONTACT WITH WATER.
Stability Condition to Avoid:AVOID OPEN FLAMES, WELDING ARCS OR OTHER
HIGH TEMPERATURE SOURCES WHICH INDUCE THERMAL DECOMPOSITION.
Hazardous Decomposition Products:THERMAL DECOMPOSTION MAY YIELD CO*2,
CO.
Disposal
Waste Disposal Methods:DISPOSE OF ALL WASTES, INCLUDING ABSORBENTS USED
TO CLEAN UP SPILLS INTO 55 GAL METAL CNTNRS & DISPOSE IN APPROVED
DUMPSITE IN ACCORDANCE W/PRESCRIBED FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.